Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Specials & Closeouts

Cannondale Scalpel-Si Team
$6,000.03 $8,999.99 33% Off
Cannondale's Scalpel-Si Team cuts straight to the podium with raw XC speed and razor-sharp handling. The Scalpel-Si’s Ballistec carbon frame comes into its own when you step on the gas and need snappy acceleration and direct power transfer. Fly through rooty trail sections with 100mm of RockShox Monarch XX travel in the rear, while Cannondale's 100mm-travel Lefty 2.0 Carbon fork chews through chop to keep you on your line. A pair of ENVE Carbon M50 rims and tubeless-ready Schwalbe tires team up to throw down on crooked descents while seeming weightless up steep climbs. To launch you up those hills, SRAM’s 12-speed XX1 Eagle drivetrain flaunts super lightweight and a huge 10-50 cassette, all with the precise shifting you expect from SRAM. SRAM’s Level Ultimate brakes keep the party under control with power to spare and unbelievably dialed modulation. Cannondale’s carbon handlebar and seatpost with a ProLogo Zero II saddle ensure scary lightweight, yet comfortable contact points for your all-out race day. Small: 27.5-inch wheels Medium – X-Large: 29-inch wheels
Cannondale Jekyll Carbon 1
$5,384.60 $7,749.99 31% Off
Cannondale’s Jekyll Carbon 1 gets you down the mountain hysterically fast with a light, stiff, and tough full-carbon BallisTec frame that arrives at the bottom begging to do it again. And you will, too, with 165mm of Fox Factory X EVOL-guided travel in back and 170mm more up front, courtesy of Fox’s buttery Factory Float 36 fork. Together, they make easy work of gnarly descents where the only break you get is the climb back up. Since we’re talking about climbing, the Jekyll is no slouch in the uphill department, either, with a switch-on-the-fly rear suspension that offers Hustle Mode for tenacious efficiency. Put the power to the 12-speed SRAM X01/XX1 Eagle drivetrain via a Descendant carbon crankset, and you’ll gain elevation as fast as you drop the competition. Meanwhile, SRAM’s flawless Guide RSC brakes modulate precisely, so you can negotiate any trail with dialed control. This rig’s Maxxis Minion EXOs eat loose trail for breakfast wrapped around Cannondale’s incredible HollowGram 30 wheels that spin up like they’re not even there while standing up to unwavering speed through the chop. So, jump on, slam the RaceFace Turbine dropper post, and flow this trail beast straight to victory.
Cannondale Scalpel-Si Carbon 2 Eagle
$4,615.40 $6,499.99 29% Off
Cannondale's Scalpel-Si Carbon 2 ascends like an angel and descends like a fiend. The super-stiff Ballistec carbon frame and oversize bottom bracket on the Scalpel-Si come into their own when you need to step on the gas. Rocks and roots are no big deal with 100mm of front and rear travel from a RockShox SID World Cup XX fork and Monarch shock. This XC rocket is dressed to the nines with Cannondale CZero carbon rims and tubeless-ready Schwalbe tires that track through buffed singletrack and chunky gnar with aplomb. SRAM's 12-speed Eagle drivetrain and carbon X1 crank ensure flawless shifting, a huge gear range, and instant power transfer. Shimano XT brakes keep the party under control with impressive power and modulation. A carbon handlebar, carbon seatpost, and stem from Cannondale, and a Prologo saddle, round out the contact points. When it's time to cut to the front of the pack, you need a Scalpel.
Cannondale Jekyll Carbon 2
$4,384.58 $5,999.99 27% Off
Cannondale’s Jekyll 2 rolls on a fast, light, and tough BallisTec carbon frame that shrugs off enduro brutality and arrives at the bottom begging to do it again and again. And you will, too, with 165mm of Fox Float X Elite EVOL-guided travel in back and 170mm more up front, courtesy of Fox’s stiff, enduro-loving Float 36 fork. Together, they make easy work of gnarly descents where the only break you get is the climb back up. Since we’re talking about climbing, the Jekyll is no slouch in the uphill department, either, with a switch-on-the-fly rear suspension that offers Hustle Mode for tenacious efficiency. Put the power to the 12-speed SRAM X01 Eagle drivetrain via Descendant carbon crankset, and you’ll gain elevation as fast as you drop the competition. And, for all-mountain dominance, you won’t find better rubber than the Jekyll’s Maxxis Minions, wrapped around 29mm WTB Frequency Team rims that spin up fast and take enduro punishment like a masochist. SRAM’s sweet Guide RS brakes modulate beautifully to keep you on course, even when that course can only be described as “sketchy.” So, jump on, slam the RaceFace Turbine dropper post, and flow this trail beast straight to victory.
Cannondale Scalpel-Si Women's 1
$4,153.85 $5,999.99 31% Off
The lightest, best climbing, best descending, all-around fastest dual-suspension XC race bike ever made — for women with a need for speed. The carbon frame and oversize bottom bracket on the Scalpel-Si come into their own when you need to step on the gas. Fly through rooty trail sections with 100mm of RockShox Monarch XX travel in the rear, while Cannondale's 100mm-travel Lefty 2.0 carbon fork chews through chop to keep you on your line. With HollowGram 23 Superlight carbon wheels and tubeless-ready Schwalbe tires, you'll rip descents and climb like a goat. To throw you up those hills, SRAM’s 12-speed X01 Eagle drivetrain flaunts a huge 10-50 cassette and the precise shifting you expect from SRAM. Shimano XT brakes keep things in check with power to spare and single-finger modulation. Cannondale’s own carbon handlebar, stem, and carbon seatpost with a Fi'zi:k Arione Donna saddle ensure lightweight, comfortable contact points whether it’s an after work power hour or an all day race.
GT Fury World Cup
$3,999.99 $7,499.99 47% Off
Born in the forge of international World Cup competition, and proven by World Champions Gee and Rachel Atherton, GT's Fury World Cup is ready to go from our shop floor straight to the nearest podium. This aluminum downhill master proudly boasts 210mm of GT's race-proven Independent Drivetrain Suspension enhanced by a tunable, Kashima-coated Fox DHX RC4 coil shock. The front end is just as controlled thanks to a Fox 40 RC2 punishing the terrain with 203mm of Kashima-enhanced stroke. Nothing less than Shimano Saint graces the Fury, with pro-proven cranks, hubs and gearing, along with their legendarily powerful brakes. Stan's NoTubes rims with fat, grippy Continental Der Kaiser tires handle any chunder or obstacle that is dumb enough to be in your way. And, the PRO Atherton kit includes 800mm-wide bars, lock-on grips, post, and titanium-rail saddle. Go big, go fast, and be a gracious winner.
GT Helion Carbon Pro
$3,799.99 $5,499.99 31% Off
Whether you're looking to add some new trophies to your shelf, or blast local trails with your riding buddies, GT's Helion Carbon Pro sports the acceleration and handling required to ensure every day on the trail is a winner. GT's light and nimble carbon frame soaks up trail obstacles with Fox-powered front and rear suspension, while GT's XC-oriented geometry places s heavy emphasis on speed, efficiency, and agility. The whole thing rolls on Stan's tubeless-ready Crest rims, 350 hubs from DT Swiss, and grippy 27.5-inch Maxxis tires that keep you pinned in the corners. Meanwhile, a light and fast 1 x 10-speed Shimano XT drivetrain graces the Helion Carbon Pro, with a Race Face Turbine crankset to transfer your torque to the trails. And, powerful Shimano XT hydraulic discs mean you can brake later and corner faster, all with impeccable control. The rest of the Pro is equally high-tech with Race Face's Turbine 35 bar, stem, and seatpost, and a Fizik Tundra saddle.
Cannondale Scalpel SE 1
$3,692.31 $5,499.99 33% Off
The Scalpel — unleashed. More travel front and rear, burlier components and a dropper post transform the ultimate XC race machine into the ultimate fast trail slayer. The full carbon frame doles out 115mm of travel controlled by a Fox EVOL shock to keep your rear wheel tracking at high speeds. Cannondale’s Lefty 2.0 handles the chop up front with another 120mm of compliance, coupled with knife-sharp handling. You’ll be rolling fast on a set of Stan’s ZTR Arch MK3 wheels, ready to go tubeless with Maxxis Ardents for high traction. SRAM keeps you ahead of the pack with an Eagle 12-speed drivetrain, while Shimano XT brakes modulate huge power. And, with a ti-railed Fabric Scoop saddle atop a Turbine dropper, you’re ready for anything the trail throws at you. Small: 27.5-inch wheels Medium – X-Large: 29-inch wheels
Cannondale Scalpel-Si Carbon 3
$3,384.58 $4,999.99 32% Off
Cannondale's Scalpel-Si Carbon 3 slices a path to the podium with unbridled XC speed and pinpoint handling. The Ballistec carbon frame and oversize bottom bracket on the Scalpel-Si come into their own when you need to step on the gas. Rocks and roots are no big deal with 100mm of RockShox Monarch travel in the rear. Up front, the 1.5-inch head tube and Cannondale's 100mm-travel Lefty 2.0 Carbon XLR fork chew up rocks and roots, transforming techy trail sections into a magic carpet ride. With Stan's NoTubes ZTR Crest rims and tubeless-ready Schwalbe tires you'll blast through buffed singletrack and chunky gnar with ease. Cannondale HollowGram Si cranks and an 11-speed Shimano XTR/XT drivetrain go together like peanut butter and chocolate, with a wide 11-42 gear range and the on-trail performance you expect from Shimano's high-end mountain components. Shimano XT brakes keep the party under control with trademark power and unbelievably controlled modulation. A carbon handlebar, carbon seatpost, and stem from Cannondale and a Prologo saddle ensure lightweight, comfortable contact points. With a Scalpel-Si under your control you'll cut through the competition.
Cannondale Jekyll Carbon 3
$3,000.00 $4,199.99 29% Off
When you’re on the Jekyll 3 from Cannondale, nothing dares get in your way. That’s because Jekyll’s fast, light, and tough BallisTec carbon frame shrugs off enduro brutality and arrives at the bottom begging to do it again and again. And you will, too, with 165mm of Fox DPS EVOL-guided travel in back and 170mm more up front, courtesy of Fox’s stiff, enduro-loving Float 36 fork. Together, they make easy work of gnarly descents where the only break you get is the climb back up. Since we’re talking about climbing, the Jekyll is no slouch in the uphill department, either, with a switch-on-the-fly rear suspension that offers Hustle Mode for tenacious efficiency. Put the power to the Shimano SLX drivetrain via Cannondale’s Si crankset, and you’ll gain elevation as fast as you drop the competition. And, for all-mountain dominance, you won’t find better rubber than the Jekyll’s Maxxis Minions, wrapped around 29mm WTB STP rims, well-known as workhorse hoops that’ll bail you out of your risky moves straight as an arrow. Shimano also provides powerful hydraulic brakes that keep you on course, even when that course can only be described as “sketchy.” So, jump on, slam the TransX dropper post, and flow this trail beast straight to victory.
Cannondale Scalpel-Si Carbon Women's 2
$2,769.23 $4,199.99 34% Off
Cannondale's Scalpel-Si Carbon Women's 2 ascends like an angel and descends like a fiend. The super-stiff Ballistec carbon frame and oversize bottom bracket on the Scalpel come into their own when you need to step on the gas. Rocks and roots are no big deal with 100mm of RockShox Monarch travel in the rear. Up front, the 1.5-inch head tube and Cannondale's 100mm-travel Lefty 2.0 Carbon XLR fork chew up rocks and roots, transforming techy trail sections into a magic carpet ride. Stan's ZTR Rapid rims and tubeless-ready Schwalbe tires track through buffed singletrack and chunky gnar with equal aplomb. Cannondale optimized the Scalpel-Si for women with shorter HollowGram Si cranks, and paired them with a 2 x 11-speed Shimano XT drivetrain that has the smooth shifting, wide gear range, and pedigree to carry you to the front of the pack, or at least ahead of your friends. Shimano XT brakes keep the party under control with power and unbelievably controlled modulation. A handlebar, seatpost, and stem from Cannondale, and a Fizik women's-specific saddle offer comfortable, lightweight contact points. When it's time to claim that Queen of the Mountain title, you need a Scalpel-Si
GT Helion Pro
$2,299.99 $3,499.99 34% Off
Whether you're looking to add some new trophies to your shelf, or blast local trails with your riding buddies, GT's Helion Pro sports the acceleration and handling required to ensure every day on the trail is a winner. GT's light and nimble aluminum frame soaks up trail obstacles with Fox-powered front and rear suspension, while GT's XC-oriented geometry places s heavy emphasis on speed, efficiency, and agility. The whole thing rolls on Stan's tubeless-ready Rapid rims, Shimano SLX hubs, and grippy 27.5-inch WTB tires that keep you pinned in the corners. Meanwhile, a light and fast 2 x 11-speed Shimano XT drivetrain graces the Helion Pro, with a Race Face Ride crankset to transfer your torque to the trails. And, powerful Shimano SLX hydraulic discs mean you can brake later and corner faster, all with impeccable control. The rest of the Helion is equally high-tech with Race Face's Ride bar, stem, and seatpost, and a WTB Silverado Race saddle.
GT Helion Expert
$1,999.99 $3,199.99 38% Off
Light, lively and sure to leave a grin plastered across your face, GT's Helion Expert is the key to trail-riding bliss. The light GT aluminum frame soaks up trail obstacles with 110mm of plush, controllable front-end suspension powered by a Fox Float fork, plus their 130mm rear shock, while GT's XC-oriented geometry places heavy emphasis on speed, efficiency and agility. This capable machine rolls on WTB UST-tubeless wheels, quality Shimano SLX hubs, and grippy Continental 27.5-inch tires to keep you pinned in the corners. Meanwhile, the 2x10 Shimano Deore/SLX drivetrain keeps things fast, with the precision shifting it takes to drop your buddies and the climbing capability to tackle epic days in the saddle. Plus, the Shimano Deore hydraulic discs provide awesome speed control for setting personal bests on local descents. And, the rest of the Expert is dressed to the nines with Race Face's Ride bar, stem, and seatpost, and a choice WTB saddle.
GT Fury Elite
$1,799.99 $3,250.00 45% Off
GT's Fury Elite is a dose of metal courage that's ready for your next assault on the mountain. RockShox handles the suspension up front with a 200mm Domain dual-crown while a Fox Van R coil-over delivers 210mm in the back. The aluminum Fury has slack, dialed geometry and GT's pro-proven Independent Drivetrain suspension tailor-made for big hits, slashing berms, and blurring speeds. Your landing gear consists of tough Jalco wheels with fat Continental tires, while your speed is controlled by Shimano hydraulics with 203mm rotors. A SRAM 1x9 X5 setup gives you all the gears you need, and you've got an 800mm-wide bar and direct-mount stem to pilot you down the course.
GT Sanction Frame
$1,530.00 $1,999.99 23% Off
Would you describe your favorite trails as "rowdy" and "gnarly?" Then the designers at GT had you in mind when they built the Sanction Frame. With GT's COR Enduro design aluminum for efficient pedaling, and their optimized blend of DH and pedal-friendly geometry, plus 160mm of GT's I-Drive rear travel, the Sanction is fully capable of going up and down, as well as over and off pretty much anything. And, its Fox Float rear shock offers totally controllable suspension thanks to its adjustable rebound and remote lockout. With this fine frame, you can build one bike to rule them all!
Crank Brothers Iodine 3 Boost 29-inch Wheelset
$750.00
Elite-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black + silver anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: Sapim stainless steel - Spoke butting: 2.0 / 1.8 / 2.0 - Spoke length: 166mm - Spoke pins: hollow 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, alloy - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1850g per set - Weight: 27.5-inch, 1780g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
DT Swiss XM 1501 Spline ONE 25
$552.00 - $750.00
At 25mm width, the XM 1501 SPLINE ONE 25 is at home flying up gravel climbs and descending demanding trails. To the experienced rider it offers the combination of lightweight and trail strength he is looking for. To the less experienced rider it is a light package to start tapping into all mountain terrain. Equipped with our legendary Ratchet System and featuring a DT Swiss quality wheel build, it is your athletic partner for exploring all of the mountain.
Spank 350 Vibrocore 27.5-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Spank 350 Vibrocore 29-inch Wheelset
$699.00
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
Spank Oozy Trail 345 Wheelset
$649.00
Up your width, up your traction, up your stoke! SPANK Industries’ OOZY Trail 345 Wheelset is hand built and trued to industry leading standards. 32H straight-pull OOZY Trail Hubs offer increased engagement and adaptability, and utilize unique over-sized SSL (single spoke length) flanges to improve contact and support between spokes, delivering enhanced stiffness, durability, and spoke torque retention. Laced with Spank’s 30mm internal width OOZY Trail 345 Rims, the OOZY Trail 345 Wheelset combines the strength and rigidity of SPANK’s patented Oohbah reverse-well rim profile with the unparalleled tubeless performance of Bead Bite anti-burp rim hooks. The result is a wide-set, bombproof wheelset that’s both lightweight and comfortable on any terrain. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Freehub: alloy - Shimano (XD available) - Adapters Included (mm): FRONT: 20x110 REAR: QRx135 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: trail
Spank Spank 350 27.5-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Spank Spank 350 29-inch Wheelset
$649.00
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Crank Brothers Zinc 3 Wheelset
$623.20 $750.00 17% Off
Elite-level aluminum wheels for gravel/cx Details - Simple and beautiful — our unique wheel design is based around principles of strength, stiffness, and acceleration. - Low rotational inertia — unique wheel design distributes mass closer to the hub for faster acceleration and deceleration. - Twin pair spoke technology — designed using the strongest shape in construction, the triangle, to maximize strength and stiffness. - Single spoke length — easy to true and replaceable without removing tire. - Tubeless ready / hole-less rims — stronger and no rim tape required for tubeless setup. Specs - Freehub: 3-pawl, 21T, alloy - Front hub end caps: 15mm (installed), 9mm (included) - Internal rim width: 21mm - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Rim finish: Shot peen, black anodizing - Rim material: 6061-t6, smooth weld joint - Skewers: Skewers not included, available separately - Spoke material: Stainless steel - Warranty: 2 years - Weight: 1645g - XD driver: XD driver compatible, available separately
DVO Jade Coil Shock
$497.25 - $585.00 $585.00 15% Off
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
DT Swiss E 1700 Spline 30
$289.00 - $532.00 $361.00 - $532.00 Up to 25% Off
When tracks get really, really rocky and the roots are thicker than your legs, it is time to choose a wheel like the E 1700 SPLINE 30. Paired to a 2.5-inch tire you end up with an enormous amount of grip, allowing you to attack even the nastiest sections quite relaxed. The wheel build with double butted Competition spokes in their strongest straight pull edition is based on DT's reliable and lightweight Ratchet System hubs. A combination just right for Enduro use: strong enough to go through anything, light enough to get there.
No Image
$521.10 $550.00 5% Off
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Race Face Turbine 29-inch Rear Wheel
$449.99 - $499.99 $499.99 10% Off
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Sun Ringle Black Flag Expert AL Wheelset
$494.99 $549.99 10% Off
The Black Flag is our XC wheel line and is built for riders that don’t blame their performance based on a few grams of weight. Are they light? Yes. Do they perform? Hell yes. Most importantly, within our Black Flag lineup you’ll get the long lasting durability that SUNringlé is synonymous with. PRODUCT SPECS: - STR Tubeless Ready - 25mm Outer Rim Width - 27.5", 29" - QR, 15mm, 20mm Front Axle options (all endcaps Included) - QR x 135, 12 x 142 Rear Axle options (all endcaps included) - Boost 110x15 and 148x12 wheel options available - SRX Cartridge Bearing Hubs - Wheelsmith Straight-Pull, Double-Butted Spokes - Wheelsmith Alloy Nipples - Includes STR Sealant and STR tubeless valves - Includes XD Driver - Weight/Wheelset - 27.5" - 1675g, 29" - 1730g
No Image
$463.20 $550.00 16% Off
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - Weight: 27.5-inch, 1710g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
No Image
$463.20 $550.00 16% Off
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1910g per set - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/am e-bikes up to 350 watts max
No Image
$463.20 $550.00 16% Off
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
100% Aircraft DH MIPS Helmet
$360.00 - $450.00 $450.00 20% Off
The AIRCRAFT is 100%'s premier Downhill MTB helmet precision engineered with a Carbon/Kevlar composite shell for an ultra-lightweight feel. Ventilation is enhanced with 25 different channels to manage airflow creating one of the most ventilated DH helmets on the market. Already loaded with performance and safety features, all AIRCRAFT helmets now come equipped with MIPS Technology making it an even safer choice. - Ultra-light design featuring aerospace Carbon/Kevlar composite shell - MIPS technology adds more protection against rotational violence to the brain caused by angled impacts - Active cooling system maximizes airflow with 25 vents and channels - Washable, antibacterial comfort liner, cheek pads, and chin strap covers - Emergency release cheek pads and integrated release system compartment for quick, safe removal - Titanium D-Ring buckle provides a secure fit while saving weight - Engineered with 2 shell sizes and 3 EPS sizes to achieve the perfect fit - Adjustable visor with machined, lightweight aluminum screws - Durable helmet case with integrated goggle pocket included
DT Swiss 240s Road Rear Hub
$384.21 - $448.80 $448.80 14% Off
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
GT Speed Series Pro Frame
$349.99 $449.99 22% Off
GT earned its wings way back in the early days of the BMX race scene and the Speed Series is the culmination of years of knowledge and refinement. Everything about the Pro frame is fast—from the hydroformed aluminum construction, beefy BB30 bottom bracket, and tapered head tube to the race-winning geometry. A smooth, integrated quick release for the seatpost keeps things clean, and CNC-machined chain tensioner dropouts make it easy to dial in the bike pre-race. The best place to check this frame out, aside from our shop, is on the podium.
Race Face Vault Rear Hub
$292.49 - $324.99 $324.99 10% Off
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.
X-Fusion Hilo Strate Dropper Seatpost
$242.99 - $289.99 $269.99 - $289.99 10% Off
X-Fusion's Hilo Strate dropper seatpost is a no-nonsense post with air spring and hydraulic lockout. The internal cable routing keeps your bike's appearance clean and simple while keeping the cable out of harm's way. The BAT activation remote with uni-directional lever can be mounted on the left or right, above or below the handlebars. - Double key-way design prevents lateral twisting - Double bolt clamp with wide range of seat angle adjustment - Seat clamp fits both standard and 7 x 9 mm Carbon Rails - Cable activated, hydraulic action, infinitely adjustable travel - Weight: 530g - Remote Position: Left or Right - Cable Routing: Internal - 2-year warranty
DT Swiss 240s MTB 6-Bolt Front Hub
$225.00 - $265.00
The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
DT Swiss E 1800 Spline 23
$188.80 - $241.60 $236.00 - $302.00 20% Off
Ever fancied riding your road bike at its full potential? All you need to do is slot a pair 1800 SPLINEs in the dropouts. Whether you want to cut some minutes off your commute by taking new shortcuts, corner harder and hit the apex more precisely, or undertake some epic rides into unknown terrain, 1800 SPLINE allows all of that. With a precision build and high-end components throughout, it's the right wheel to find new roads and ride old ones like never before.
Easton EC70 AX
$214.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon
Race Face Atlas Cinch Crank Arms
$161.99 - $209.99 $178.49 - $209.99 Up to 23% Off
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
HALO 6D Road Disc Hubs
$80.95 - $209.95 $89.95 - $209.95 10% Off
- Front: 9 x 100mm quick-release, 24-hole - Rear: 10 x 130mm quick-release, 24-hole - Lightweight and silky smooth 7075 alloy road racing hubs use straight pull spokes - Front has 2 sealed bearings, alloy axle - Rear features 6 pawls with double tips giving 12 point simultaneous engagement on a 30 point drive ring (12 degree engagement), CNC 7075 hard aluminum cassette body with Shimano HG splines, plus 4 sealed cartridge bearings and a lightweight alloy axle - Shimano/SRAM 8-10 speed (with spacer), Shimano/SRAM 11-speed road cassette compatible
SRAM PF30/BBright 79/83mm Bottom Bracket Assembly w/Ceramic Bearings
$209.70 $236.00 11% Off
Get more distance out of every pedal stroke with SRAM's phenomenal PF30/BBright 79/83mm Bottom Bracket Assembly. It features ceramic bearings that drastically reduce drag on the crankset, meaning more of your power turns into forward momentum. Plus, it presses directly into your frame's 79 or 83mm PF30/BBright bottom bracket shell for reduced weight and increased longevity.
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$49.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Race Face Aeffect Dropper Post
$162.00 - $198.00 $180.00 - $220.00 10% Off
Introducing the Aeffect Dropper Post. A budget friendly but rock solid option for riders wanting to enter the dropper market. A sealed damping system wrapped in 7075 aluminium makes for a lightweight dropper that can take the hits. Internal cable routing compatible for modern frame design and available in the two most popular drop measurements, it's easy to swap out your standard post and upgrade your ride. - Cable actuated, hydraulic cartridge - Infinite adjust within travel - Return speed adjustable (150mm only) - Same 2 bolt clamp system as Ride and Chester posts - Ergonomic 1x lever sold separately - Compatible with the Turbine universal and 1x levers - Standard shifter cable and housing
DT Swiss 240s Straightpull MTB Center Lock Front Hub
$189.00
The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.
Spank Oozy Boost R148 XD Hub
$188.10 $219.00 14% Off
- Boost developed straightpull hub with unique oversized flanges - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x148 Boost, SLS straight pull - WEIGHT (g): ±282 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano / Steel XD - ADAPTERS INCL. (mm): N/A - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos
Spank Oozy R142/135 XD Hub
$188.10 $219.00 14% Off
- Trail riding optimized straightpull hub with unique oversized flanges, - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x142mm, SLS straight pull - WEIGHT (g): ±281 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano Standard / Steel XD - ADAPTERS INCL. (mm): QRx135mm, 12x142 - ADAPTERS AVAIL. (mm): QRx135mm, 10x135mm, 12x135mm, 12x142mm - FINISH: Polish anodized, laser logos
Spank Oozy Trail Hubs
$107.10 - $188.10 $119.00 - $219.00 Up to 24% Off
SPANK's new OOZY Trail Hubs are a huge step forward in straight pull hub design and manufacturing. The OOZY Trail Hub has unique oversized straight pull flanges, and a 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing, offering added spoke strength, wheelset stiffness, and spoke torque retention never before seen in straight pull designs. The SSL (single spoke length) flanges offer ultimate ease and convenience of maintenance. SPANK's end cap system is compatible with SPIKE hubs, and makes conversion between 135 and 142mm rear spacing simple — in QR, 10mm, or 12mm axle diameters. 30T engagement and tried and true 3 pawl system deliver a good blend of quick pick up and trustworthy durability. Like the benefits and techie look of straight pull hubs but not the 28H drawback of traditional designs? Then OOZY Trail Hubs are the answer.
FSA BB30 Bearing Assembly
$49.99 - $179.99 $49.99 - $199.99 10% Off
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options
Leatt Helmet DBX 3.0 DH
$170.99 $189.99 10% Off
The DBX 3.0 DH helmet has all of the high-end downhill features at a great value. Leatt's focus when designing this helmet was on world-class safety and value for intelligent DH riders like you. With an ASTM Downhill-certified fiber shell and brain rotation and concussion reduction tech, this is the real deal. It's also fitted with a convenient Fidlock magnetic buckle. Leatt helmets feature 360° Turbine Technology. The helmet is lined with turbines which are 360° moving discs constructed from an energy-absorbing shape and material. This tech has two exclusive advantages—the reduction of rotational acceleration to the head and brain, and the absorption of energy upon impact at concussion level. It is further equipped with a breakaway visor function that offers extra rotational force reduction in a crash. So, the next time you crash, see to it that you are protected by the best! - Fiberglass ASTM DH certified shell in two sizes - 360° Turbine Technology - Reduces up to 30% of head impact at concussion level - Reduces up to 40% of rotational acceleration to head and brain - Fidlock magnetic closure system - Dri-Lex moisture wicking, breathable, anti-odor, and washable inner liner - Optimal neck brace compatibility - Superior ventilation - Visor with breakaway function for rotational force reduction in a crash - Emergency cheek pad removal - Certified and tested: AS/NZS 2063:2008, ASTM F1952–10, EN1078, CPSC 1203 - Weight: From 1160g ± 50g (2.55 lbs)
SRAM X9 3.3 Crankset
$170.50 $341.00 50% Off
SRAM's X9 crankset is favored by everyone from weekend rippers to marathon riders crossing the Alps. It offers a great balance of durability, low weight and impressive stiffness. SRAM's super-stiff X-glide chainrings are engineered for fast, predictable shifting no matter what. Light, tough and sleek, SRAM's X9 cranks are ready to dominate. - Bottom bracket sold separately
MRP Mega G4
$134.95 - $169.95 $169.95 21% Off
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells) - 204g (Mega Alloy ISCG)
GT Interceptor Pro Frame
$160.00 $299.99 47% Off
GT's Interceptor Pro offers classic BMX style with the all important combination of light and strong. This frame is built with hard-hitting chromoly and feature built-in chain tensioners, linear pull brake mounts and a Euro sized bottom bracket. Plus, an integrated seatpost collar adds just a little more style.
SRAM XX Front Derailleur (High-clamp, Top-pull)
$68.01 - $159.99 $159.99 57% Off
When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Front Derailleur is crafted from forged aluminum and steel to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. Plus, this beauty has been painstakingly engineered to throw down the fastest and smoothest front gear changes you've ever experienced.
Chromag BZA 35
$132.30 - $147.00 $147.00 10% Off
Chromag's BZA 35 stem is strong, light, and burly. Featuring a 35mm bar/stem interface and weighing a perfect 165 grams this stem is light yet extremely stiff for positive control. - CNC profiling - Weight: 165g (50mm length)
Chromag Ranger Stem
$108.90 - $140.00 $140.00 22% Off
Chromag's Ranger stem is carved by technical artists using futuristic robot machines for a strong, light, and elegant piece of heavy-duty bike ordnance. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end. - CNC machined from premium alloy optimized for strength and fatigue resistance - As light as 140g - 0 degree rise, the way it should be - 31.8 bar clamp
iXS Trigger Knee Guard
$118.15 - $139.00 $139.00 Up to 15% Off
The Trigger models manage without hard shells and are therefore light and with its asymmetrical design extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Trigger we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Asymmetrical Design, Left And Right Specifically And Individually Formed For Improved Comfort. - Anatomically Formed For Improved Comfort, Flexibility And Function - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified
Cane Creek 110 Series External Cup Headset
$130.50
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
SDG Ti-Fly Saddle
$116.99 - $129.99 $129.99 10% Off
- Synthetic microfiber top and side panels, super lightweight EVA foam padding - Shibuya: inspired from Tokyo's brightest and funkiest fashion forward district with bright neon embossed graphics, colored stitching, mixed and matched magenta and cyan painted rails and injected colored green bases - Anthem: red/white/blue star tribute to the great Evel Knievel - Gripper Storm: one piece synthetic waterproof Gripper traction cover - Kevlar: full one piece Kevlar cover
iXS Trigger AM
$125.10 $139.00 10% Off
All-Mountain and Trail helmet. The high-end in-mold construction and its large and integrated venting system provide highest safety level and best comfort. The 3-level visor adjustment accommodates goggles and preferred positioning, and its magnetic closure system provides easy handling. Trigger AM Fulfills European and US safety standards. - Double In-mold Shell Technology - External And Internal Ventilation Channels - Goggle Compatible Adjustable Visor - Precision Interlocking - Ergofit Ultra System For Horizontal And Vertical Adjustment - Magnetic Closure - En1078, CPSC, KC - +/- 350g
Page 1 of 4 Next page